Love-Air R/C Classifieds

For Sale, new (never flown) SD Models 30% Yak 54 for a 50cc gas engine. Construction is finished. Install servos, receiver, batteries, motor and ignition. Cost $549. Sell for $250.
http//www.sd-model.com/subs/arfs/yak54_87.htm

Also available, new ZDZ 50NG Gas Engine with ignition, Pitts muffler, two ZDZ props, prop drill jig, spinner, etc. Cost over $700. Make offer...
http://www.rcshowcase.com/html/ZDZ/zdz50.html

Wanted:

50 to 70 sized used four- stroke engine, most any brand, as long as it is in reasonably good condition.

I am getting out of the glow motor and into gas engines. Here is what's up for sale: 

- NIB DC-3 arf with fiberglass fuse, factory gel coated (Kyosho), and two Magnum 52FS engines. 

- NIB 80 inch wingspan Top Flite Beechcraft Bonanza with retracts, air bottle and lines and NIB YS 1.20FS engine. 

- NIB Vision arf. 

- NIB Funtana kit by Modelbau, very nice kits, all the wood is truly hand selected. (See this kit on Desert Aircraft's website). 

- Complete, ready-to-fly Super Stearman with Moki 1.8 and Pitts muffler and all digital servos (nice)!

- Balsa Nova 80" wingspan with Moki 2.10, complete, needs only a receiver to fly. Excellent 3-D trainer or everyday fun plane. 

- Old Timer style plane with Norvel .09 that I have flown at my house, also complete. 

- Quickie 500 style plane, semi arf, with Rossi .45 two stroke. 

Any reasonable offer will be accepted. 

Hobbico Avistar 40 II MonoKote 59" (Like NEW)

-- O.S. .46 FX Non-Ringed w/Muffler

-- Futaba flight pack w/ S3003 Servos 

Hobbico AirVista ARF 62" (Good Condition)

-- O.S. .40 LA w/Muffler Natural

-- Futaba flight pack w/ S3004 Servos

Great Planes Piper J-3 Cub 40 Kit O.S. .60 ,76.5".  Only needs flight pack. (Like New)

Futaba Skysport 4 Ch 44 (Like NEW)

Futaba 6XAS 6-Channel PCM1024 Ch 27 (Like NEW)

Hand crank fuel pump  (NEW)

Dubro Kwik-Klip Glo Starter w/Charger  (NEW)

3 - O.S. Glow Plugs  No. 8  (NEW)

AeroTrend Rubber Bands  (NEW)

Propellers  (NEW)

RealFlight R/C Simulator G2  (I realize this is super old but I don't need it and it helped me a lot when I was learning.)

I really want to sell this as an entire package.  I only flew the Avistar 5 or 6 times and the AirVista was bought used from a friend and I put a new O.S. .40 LA on it.  I bought the Piper from a guy that had only flown it once.  (I never had the guts to try it.)

You can see pics at http://www.hlavka.net/rc/index.htm

Lanier Mariner .40 seaplane. OS .46 with full Hitec servos (5). (Receiver, battery pack and transmitter not included.) Asking $150.

Great Planes Super Chipmunk. OS 1.20 four-stoke engine. Includes flaps, Hitec servos for all functions. (Receiver, battery pack and transmitter not included.) Asking $300.

Great Planes Matt Chapman CAP 580  1/3 scale. DA 100 engine never started. Carbon fiber prop.  Some servos installed -- 2 on elevator, and also ailerons -- but no rudder servos installed.  Futaba 9-channel programmable radio included. Asking $1200.

$1650

I have 2 airplanes 

1. Aeroworks .60 size edge 540t assembled ARF with a Saito .72 motor and propeller never flown. The electronics are the Futaba 7CAP 7 channel PCM frequency on channel 55. The plane itself was close to $180, the motor was $250, and the radio was $280. The last time I started the motor I was able to "chicken stick" it on the 2nd or third try. This alone is worth the $650 but I will also throw in......

2. I think its an older Cadet trainer with a 4 channel Futaba radio on channel 34. It has a .40 OS engine. This plane is what I learned on. It has some patches from some rough landings and the motor likes to stall when really warm, but that being said I have flown it many times successfully 

3. I will also throw in a balancer, power station, heat gun, 2 HOT SHOT glow plugs, hand cranking gas filler, and all the chargers for the receivers, transmitters, glow plug, and filling station. 

If you don't want the whole package you can give me an offer on individual items. 

Contact me through phone or e-mail

Aug. 28

Fliton Icon 312 NIB for sale with a Himax 2025-5300 motor with gear box, and a Phoenix 25 brushless speed controller. I'm also including 3 props for this set-up. Price is $275

Jim Hamm
970-223-2778